Firmware for hotspot routers
From this page you can download a tailor-made firmware version, with which you can turn a small, power-saving Wi-Fi router into a Wi-Fi hotspot.
- Changelog
- PDF manual for routers with firmware version 3.0 (for supported routers from TP-Link, Ubiquiti and Netgear).
- FAQ hotspots installation
- In the standard settings the web interface can be reached at 192.168.1.1:8080 (port 8080).
- Username and password: "root", "admin".
- Use these images if your router still has the original firmware.
- Use these images if the router already runs on our firmware.
Ubiquiti EdgeRouter X
TPLINK Archer C7, Version 5
TPLINK Archer C7, Version 4
hotsplots-3.0-6007-ar71xx-archer-c7-v4-squashfs-factory.bin (6.38 MBytes)- hotsplots-3.0-5381-ar71xx-archer-c7-v4-squashfs-factory.bin (5.75 MBytes)
hotsplots-3.0-6007-ar71xx-archer-c7-v4-squashfs-sysupgrade.bin (6.38 MBytes)- hotsplots-3.0-5381-ar71xx-archer-c7-v4-squashfs-sysupgrade.bin (6 MBytes)
TPLINK Archer C7, Version 2.x
- hotsplots-3.0-6007-ar71xx-archer-c7-v2-squashfs-factory.bin (15.5 MBytes)
- hotsplots-3.0-537-ar71xx-archer-c7-v2-squashfs-factory.bin (15.5 MBytes)
- hotsplots-3.0-531-ar71xx-archer-c7-v2-squashfs-factory.bin (15.5 MBytes)
- hotsplots-3.0-6007-ar71xx-archer-c7-v2-squashfs-sysupgrade.bin (6.38 MBytes)
- hotsplots-3.0-537-ar71xx-archer-c7-v2-squashfs-sysupgrade.bin (5.63 MBytes)
- hotsplots-3.0-531-ar71xx-archer-c7-v2-squashfs-sysupgrade.bin (5.25 MBytes)
TPLINK Archer C5, Version 1.x
- hotsplots-3.0-537-ar71xx-archer-c5-squashfs-factory.bin (15.5 MBytes)
- hotsplots-3.0-531-ar71xx-archer-c5-squashfs-factory.bin (15.5 MBytes)
- hotsplots-3.0-537-ar71xx-archer-c5-squashfs-sysupgrade.bin (5.63 MBytes)
- hotsplots-3.0-531-ar71xx-archer-c5-squashfs-sysupgrade.bin (5.25 MBytes)
TPLINK TL-WDR4900 v1
- hotsplots-3.0-531-mpc85xx-tl-wdr4900-v1-squashfs-factory.bin (15.5 MBytes)
- hotsplots-3.0-521-mpc85xx-tl-wdr4900-v1-squashfs-factory.bin (15.5 MBytes)
- hotsplots-3.0-531-mpc85xx-tl-wdr4900-v1-squashfs-sysupgrade.bin (6.63 MBytes)
- hotsplots-3.0-521-mpc85xx-tl-wdr4900-v1-squashfs-sysupgrade.bin (6.63 MBytes)
TPLINK TL-WR1043ND v5
TPLINK TL-WR1043ND v4.x
TPLINK TL-WR1043ND v3.x
TPLINK TL-WR1043ND v2.x
- hotsplots-3.0-531-ar71xx-tl-wr1043nd-v2-squashfs-factory.bin (7.75 MBytes)
- hotsplots-3.0-521-ar71xx-tl-wr1043nd-v2-squashfs-factory.bin (7.75 MBytes)
- hotsplots-3.0-531-ar71xx-tl-wr1043nd-v2-squashfs-sysupgrade.bin (5 MBytes)
- hotsplots-3.0-521-ar71xx-tl-wr1043nd-v2-squashfs-sysupgrade.bin (5 MBytes)
TPLINK TL-WDR3500 v1.x
- hotsplots-3.0-531-ar71xx-tl-wdr3500-v1-squashfs-factory.bin (7.75 MBytes)
- hotsplots-3.0-521-ar71xx-tl-wdr3500-v1-squashfs-factory.bin (7.75 MBytes)
- hotsplots-3.0-531-ar71xx-tl-wdr3500-v1-squashfs-sysupgrade.bin (5 MBytes)
- hotsplots-3.0-521-ar71xx-tl-wdr3500-v1-squashfs-sysupgrade.bin (5 MBytes)
TPLINK TL-WDR3600 v1.x
- hotsplots-3.0-531-ar71xx-tl-wdr3600-v1-squashfs-factory.bin (7.75 MBytes)
- hotsplots-3.0-521-ar71xx-tl-wdr3600-v1-squashfs-factory.bin (7.75 MBytes)
- hotsplots-3.0-531-ar71xx-tl-wdr3600-v1-squashfs-sysupgrade.bin (5 MBytes)
- hotsplots-3.0-521-ar71xx-tl-wdr3600-v1-squashfs-sysupgrade.bin (5 MBytes)
Ubiquiti UniFi AP
- hotsplots-3.0-523-ar71xx-ubnt-unifi-squashfs-factory.bin (4.94 MBytes)
Ubiquiti UniFi AP Pro
TPLINK TL-WR1043ND v1.x
- hotsplots-3.0-531-ar71xx-tl-wr1043nd-v1-squashfs-factory.bin (7.75 MBytes)
- hotsplots-3.0-521-ar71xx-tl-wr1043nd-v1-squashfs-factory.bin (7.75 MBytes)
- hotsplotsWrt-3.0-056-ar71xx-tl-wr1043nd-v1-squashfs-factory.bin (7.75 MBytes)
- hotsplots-3.0-531-ar71xx-tl-wr1043nd-v1-squashfs-sysupgrade.bin (5 MBytes)
- hotsplots-3.0-521-ar71xx-tl-wr1043nd-v1-squashfs-sysupgrade.bin (5 MBytes)
- hotsplotsWrt-3.0-056-ar71xx-tl-wr1043nd-v1-squashfs-sysupgrade.bin (5.5 MBytes)
NETGEAR WNDR3700 v1
Es gibt Chargen von Netgear-Routern, die beim ersten Flashen einen ganz bestimmten Dateinamen erfordern. Sollte die Fehlermeldung "falscher Dateiname" erscheinen, die Datei in z.B. "WNDR3700-V1.0.4.35NA.img" umbenennen.- hotsplots-3.0-531-ar71xx-wndr3700-squashfs-factory.img (5 MBytes)
- hotsplots-3.0-521-ar71xx-wndr3700-squashfs-factory.img (5 MBytes)
- hotsplotsWrt-3.0-055-ar71xx-wndr3700-squashfs-factory.img (5.19 MBytes)
- hotsplots-3.0-531-ar71xx-wndr3700-squashfs-sysupgrade.bin (5 MBytes)
- hotsplots-3.0-521-ar71xx-wndr3700-squashfs-sysupgrade.bin (5 MBytes)
- hotsplotsWrt-3.0-055-ar71xx-wndr3700-squashfs-sysupgrade.bin (5.19 MBytes)
NETGEAR WNDR3700 v2
Der WNDR3700 wird nur bis zur Version v2 unterstützt. Ab v3 wurde eingeschränkte Hardware verbaut, die wir nicht unterstützen können.- hotsplots-3.0-531-ar71xx-wndr3700v2-squashfs-factory.img (5 MBytes)
- hotsplots-3.0-521-ar71xx-wndr3700v2-squashfs-factory.img (5 MBytes)
- hotsplotsWrt-3.0-055-ar71xx-wndr3700v2-squashfs-factory.img (5.19 MBytes)
- hotsplots-3.0-531-ar71xx-wndr3700v2-squashfs-sysupgrade.bin (5 MBytes)
- hotsplots-3.0-521-ar71xx-wndr3700v2-squashfs-sysupgrade.bin (5 MBytes)
- hotsplotsWrt-3.0-055-ar71xx-wndr3700v2-squashfs-sysupgrade.bin (5.19 MBytes)
NETGEAR WNDR3800
- hotsplots-3.0-531-ar71xx-wndr3800-squashfs-factory.img (5 MBytes)
- hotsplots-3.0-521-ar71xx-wndr3800-squashfs-factory.img (5 MBytes)
- hotsplotsWrt-3.0-055-ar71xx-wndr3800-squashfs-factory.img (5.19 MBytes)
- hotsplots-3.0-531-ar71xx-wndr3800-squashfs-sysupgrade.bin (5 MBytes)
- hotsplots-3.0-521-ar71xx-wndr3800-squashfs-sysupgrade.bin (5 MBytes)
- hotsplotsWrt-3.0-055-ar71xx-wndr3800-squashfs-sysupgrade.bin (5.19 MBytes)
NETGEAR WNDRMACv2
- hotsplots-3.0-531-ar71xx-wndrmacv2-squashfs-factory.img (5 MBytes)
- hotsplots-3.0-521-ar71xx-wndrmacv2-squashfs-factory.img (5 MBytes)
- hotsplotsWrt-3.0-055-ar71xx-wndrmacv2-squashfs-factory.img (5.19 MBytes)
- hotsplots-3.0-531-ar71xx-wndrmacv2-squashfs-sysupgrade.bin (5 MBytes)
- hotsplots-3.0-521-ar71xx-wndrmacv2-squashfs-sysupgrade.bin (5 MBytes)
- hotsplotsWrt-3.0-055-ar71xx-wndrmacv2-squashfs-sysupgrade.bin (5.19 MBytes)
Ubqiuti NanoStation M2
Ubiquiti-Geräte ab der Version XM.v5.6 lassen sich derzeit nicht mit unserer Firmware flaschen. Hier hilft ein Downgrade auf die Version XM.v5.5.8. Wir werden in Kürze ein Update zur Verfügung stellen.- hotsplots-3.0-516-ar71xx-ubnt-nano-m-squashfs-factory.bin (5.06 MBytes)
- hotsplotsWrt-3.0-055-ar71xx-ubnt-nano-m-squashfs-factory.bin (5.25 MBytes)
- hotsplots-3.0-516-ar71xx-ubnt-nano-m-squashfs-sysupgrade.bin (5.06 MBytes)
- hotsplotsWrt-3.0-055-ar71xx-ubnt-nano-m-squashfs-sysupgrade.bin (5.25 MBytes)
Ubiquiti Bullet M2, PicoStation M2 HP
Ubiquiti-Geräte ab der Version XM.v5.6 lassen sich derzeit nicht mit unserer Firmware flaschen. Hier hilft ein Downgrade auf die Version XM.v5.5.8. Wir werden in Kürze ein Update zur Verfügung stellen.- hotsplots-3.0-516-ar71xx-ubnt-bullet-m-squashfs-factory.bin (5.06 MBytes)
- hotsplotsWrt-3.0-055-ar71xx-ubnt-bullet-m-squashfs-factory.bin (5.25 MBytes)
- hotsplots-3.0-516-ar71xx-ubnt-bullet-m-squashfs-sysupgrade.bin (5.06 MBytes)
- hotsplotsWrt-3.0-055-ar71xx-ubnt-bullet-m-squashfs-sysupgrade.bin (5.25 MBytes)